Superior Engineering heavy duty front adjustable panhard rod suitable for Toyota Bundera and Toyota Land Cruiser Prado LJ/KZJ 71/78 Series.

Sold each.

Usage

Adjustable panhard rods are required when performing lifts 2" and over. They are adjusted so that the axle sits directly underneath the chassis.

Key Features

• Fitted with polyurethane bushes
• Manufactured from 32mm OD High Tensile Bar
• 1 1/4 UNF fine thread lock nuts, 150mm of thread and finished in a corrosion resistant zinc coating
• Lifetime warranty against bending
  
• Australian made. 

Manufacture

• Manufactured using ITS Seal Technology on internally threaded adjustable suspension linkages, eliminating the ingress of moisture or liquids that can cause corrosion or rust.
• A specially machined seal groove and incorporating a hydraulic seal between the locking nuts, the thread, and the link provide a perfect pressure-tight seal.
• This patented process (PN-2015101600) is exclusive to Superior Engineering's internally threaded items such as tie rods, drag links, panhard rods, and control arms (upper and lower).

Fitment

Certification

Some vehicle modifications require LVVTA Certification. The following products may require LVVTA Certification when fitted:

• Adjustable Drag links and Drop drag links
• Adjustable Front Struts
• Adjustable Panhard rods
  
• Adjustable Rear lower control arms
• Adjustable Rear upper control arms
• Adjustable Tie rods
• Adjustable Torque arms
• Diff drops
• Dropboxes
• Extended shackles
• Radius arms (in most instances)
• Upper control arms (UCA’s)

This information is a guide only, and we recommend you contact your local certifier in all cases where certification may be required.

Rubber bush warranty

• Where possible, Superior Engineering uses genuine Original Equipment (OE) bushes in suspension components. However, if genuine OE bushes cannot be sourced from Australian suppliers for any reasonable circumstance, they endeavour to supply Superior Engineering bushes of equivalent quality.
• Vehicle manufacturers such as Nissan Australia and Toyota Australia’s warranty policy states ‘that no bush will be covered under warranty when installed in an ‘aftermarket’ suspension component, or fitted in any ‘lifted’ vehicle.’
• Superior Engineering provides a three-month warranty on Genuine OE bushes, and Superior Engineering Rubber Bushes supplied and fitted to Superior Engineering manufactured suspension components such as radius arms, panhards and rear control arms. Superior Engineering rubber bushes are 100% Australian made and have proven to outlast Genuine OE bushes after years of testing.
• Superior Engineering products may be supplied with either style bushes, depending on manufacturers' availability and may vary across batches. The Warranties are applicable to all associated components and will be valid from the date of initial purchase. The warranty applies to bush failure from manufacturing defects. However, it does not cover abuse or over-flexing of rubber bushes outside what would be considered common use.