Lift Kit - Toyota Land Cruiser 80 Series HZJ80 / FZJ80 - 125mm

Ordering options:

  • Full Suspension Kit – Select this to purchase a full suspension kit and choose from the available component options.
  • Individual Components – Select this to order individual suspension components for your vehicle from the full suspension kit listing.

Front Suspension

Products QTY Type Part Number Per Unit Price Total Price

Shock Options

EFS X-Treme – 45mm Bore

View More Info

2 EACH 39-7005 $301.30 $602.60
+

Coil Springs

EFS Coils - 50-90kg load bearing accessories

View More Info

1 PAIR TLC-102HL5E $523.95 $523.95
+

Steering Damper

EFS Elite Steering Damper

View More Info

1 EACH SD4024 $144.90 $144.90
+
EFS X-Treme Steering Damper - 35mm Bore

View More Info

1 EACH 35-4024 $203.55 $203.55
+
Superior Engineering Steering Damper

View More Info

1 EACH 25683 $203.17 $203.17
+

Castor Corrections

See Fitment notes.
Boss Drop Box - 4" - automatic

View More Info

1 EACH DB4A80 $713.16 $713.16
+
Boss Drop Box - 4" - manual gearbox

View More Info

1 EACH DB4M80 $713.16 $713.16
+

Adjustable Panhard

Superior comp spec panhard rod

View More Info

1 EACH 1849 $418.65 $418.65
+

Extended Brake Line

EFS Braided single brake line

View More Info

1 EACH 10-1036B $48.30 $48.30
+
Force4 - Braided dual lines ABS

View More Info

1 PAIR F80AB $172.50 $172.50
+

Sway Bar Extensions

Superior sway bar extension front - 85mm

View More Info

1 PAIR 33527 $89.89 $89.89
+

Tail Shaft Spacer

Superior 25mm tail shaft spacer

View More Info

1 EACH 24458 $147.76 $147.76
+

Rear Suspension

Products QTY Type Part Number Per Unit Price Total Price

Shock Options

EFS X-Treme – 45mm Bore

View More Info

2 EACH 39-7006 $301.30 $602.60
+

Coil Springs

See Fitment Notes
EFS Coils - Constant load 150kg (Must have constant load or will sit high.)

View More Info

1 PAIR TLC-113HL5E $471.04 $471.04
+

Adjustable Panhard

Superior comp spec panhard rod

View More Info

1 EACH 1847 $418.65 $418.65
+

Extended Brake Line

EFS Braided single line

View More Info

1 EACH 10-1037B $48.30 $48.30
+

Sway Bar Extensions

Superior sway bar extension rear - chassis mount type

View More Info

1 PAIR 29098 $75.11 $75.11
+
Superior sway bar extension rear - flat plate side chassis type

View More Info

1 PAIR 1862 $75.11 $75.11
+

Lower Adjustable Rear Arms

See Fitment Notes
Superior strongbacked lower rear arms

View More Info

1 PAIR 1830 $615.66 $615.66
+

Brake Bracket

Superior Brake proportioning valve drop bracket

View More Info

1 EACH 9337 $45.56 $45.56
+

Order Table

Product Description Part Number Per Unit Price Quantity Total
EFS X-Treme – 45mm Bore

Quantity: 2

Shock Options 39-7005 $301.30 2 $602.60
EFS Coils - 50-90kg load bearing accessories

Quantity: 1

Coil Springs TLC-102HL5E $523.95 1 $523.95
EFS Elite Steering Damper

Quantity: 1

Steering Damper SD4024 $144.90 1 $144.90
EFS X-Treme Steering Damper - 35mm Bore

Quantity: 1

Steering Damper 35-4024 $203.55 1 $203.55
Superior Engineering Steering Damper

Quantity: 1

Steering Damper 25683 $203.17 1 $203.17
Boss Drop Box - 4" - automatic

Quantity: 1

Castor Corrections DB4A80 $713.16 1 $713.16
Boss Drop Box - 4" - manual gearbox

Quantity: 1

Castor Corrections DB4M80 $713.16 1 $713.16
Superior comp spec panhard rod

Quantity: 1

Adjustable Panhard 1849 $418.65 1 $418.65
EFS Braided single brake line

Quantity: 1

Extended Brake Line 10-1036B $48.30 1 $48.30
Force4 - Braided dual lines ABS

Quantity: 1

Extended Brake Line F80AB $172.50 1 $172.50
Superior sway bar extension front - 85mm

Quantity: 1

Sway Bar Extensions 33527 $89.89 1 $89.89
Superior 25mm tail shaft spacer

Quantity: 1

Tail Shaft Spacer 24458 $147.76 1 $147.76
EFS X-Treme – 45mm Bore

Quantity: 2

Shock Options 39-7006 $301.30 2 $602.60
EFS Coils - Constant load 150kg (Must have constant load or will sit high.)

Quantity: 1

Coil Springs TLC-113HL5E $471.04 1 $471.04
Superior comp spec panhard rod

Quantity: 1

Adjustable Panhard 1847 $418.65 1 $418.65
EFS Braided single line

Quantity: 1

Extended Brake Line 10-1037B $48.30 1 $48.30
Superior sway bar extension rear - chassis mount type

Quantity: 1

Sway Bar Extensions 29098 $75.11 1 $75.11
Superior sway bar extension rear - flat plate side chassis type

Quantity: 1

Sway Bar Extensions 1862 $75.11 1 $75.11
Superior strongbacked lower rear arms

Quantity: 1

Lower Adjustable Rear Arms 1830 $615.66 1 $615.66
Superior Brake proportioning valve drop bracket

Quantity: 1

Brake Bracket 9337 $45.56 1 $45.56

Subtotal

This custom suspension kit includes EFS 4WD, Superior Engineering and Boss 4WD components to deliver a 125mm lift for the Toyota Land Cruiser 80 Series models HZJ80 and FZJ80. 

Suspension lift kits are designed to maintain factory rake. Feel free to contact us to discuss options for your vehicle.

Fitment Notes

Feel free to contact us for further info before ordering.

Front Suspension

  • Coil Springs - 100-130kg coil option available. Aftermarket kits emulate factory rake. If no rear load consider 5" front and 4" rear.
  • Castor Correction - Drop boxes or radius arms required to clear tie rod. Superior radius arm option available. Additional castor bushes may be required for certified castor range.

Rear Suspension

  • Coil Springs - 300 and 500kg coil options also available.
  • Rear Springs - As a general rule, spring loading will ideally be within 150kg of constant rating for acceptable ride quality. E.g. for a 300kg constant spring, you would want 150kg of load.
  • Lower Adjustable Rear Arms - Upper rear arms may also be required for perfect installation.

Certification

Some vehicle modifications require LVVTA Certification. The following products in this suspension kit may require LVVTA Certification:

  • Drop box
  • Lower control arms
  • Panhard rod

This information is a guide-only and we recommend you contact your local certifier in all cases where certification may be required.

EFS Shocks

EFS provide a range of affordable, quality shock absorbers to suit all types of 4WD, whether you are an on-road only user, off the beaten track tourer or serious offroader. EFS Shock Absorbers are vehicle and height specific. "Not a one shock suits all approach".

General Specifications

  • Long Travel Design - Maximises wheel articulation 
  • Twin Tube Construction - Increased control of the spring during rebound and compression cycles
  • Quality Hardened Chromed Piston Rods Longer service life, and greater lateral strength
  • 5mm Outer & Inner Wall Thickness Greater durability and strength
  • Dynamic Motion Control Valve - Adjusts to different road & off road conditions
  • Polyurethane and rubber bushes – High quality elastomer and rubber mounting bushes to suit specific applications

EFS Coil Springs

EFS Coil Springs are manufactured under a strict quality control system with the use of quality Spring steel. This ensures you are purchasing a high-quality product that is backed by a three year/100,000km warranty.

EFS Coil Springs are produced in a variety of raised heights, from standard to 125mm and also a variety of spring rates to suit different applications - Towing, load bearing accessories, increased ride height and off-road competition.

Specifications

  • Shot Peened - To stress relieve the outer surface of the Coil, so the Coil can operate under higher fatigue & repeated load conditions to ensure longevity.
  • Scragged for Quality Control -This is a process where the Coil is compressed beyond its yield point; this compression will set-up residual stresses and increase the elastic limit of the spring.
  • Powder Coated - To resist corrosion & to protect the spring steel from minor damage.

EFS Leaf Springs

Transform your rigid leaf sprung vehicle into a comfortable off-road performer with EFS leaf springs. Designed as a comfort leaf spring that incorporates special features that give the driver a comfortable ride on road and increased control off road, along with increased articulation and clearance.

Specifications

  • Manufactured from high-quality grade alloyed carbon spring steel
  • Tapered Leaf Ends to reduce the inter-leaf friction and to improve pressure distribution in the load bearing area
  • Bolt Clip Liners to reduce noise and friction
  • Inter-Leaf Graphite Coating and Leaf Insert Pads to further reduce friction
  • Shot Peened & Scragged Tested to reduce stress and promote longevity
  • Bolt Clips & Military Wraps to prevent leaf spread and provide safety
  • Warranty - 3 year / 100,000 Km Warranty
  • Available in 30mm to 80mm raised heights with a slight increase in spring rates over the original equipment.

EFS Torsion Bars

The EFS Torsion Bar is increased in strength by 25% to 30% over the standard O.E Bar. EFS Torsion Bars will provide you with increased handling and response from your vehicle and compensate for extra loads.

Specifications

  • Pre-stressed for longevity and durability
  • Increased spring rate to compensate for load bearing accessories
  • Made from High Carbon Alloy Steel (XK-5160)
  • Bars feature machined splines, bar peeled and rolled to ensure strength & reliability.

Fitment

The ends of all EFS Torsion Bars are painted with a colour code, when fitting these Bars the following applies: Green to front of vehicle, Blue to left & Red to right.

EFS U Bolts

Made from quality carbon steel with rolled threads to increase strength due to uniform grain finish and powder coated for protection against corrosion.

Deep nuts are supplied for safety and strength with flat washers to provide a smooth contact surface area to reduce plate friction.

EFS Bush Kits

EFS Polyurethane Bushes are made from high quality elastomers which gives the EFS Polyurethane Bush a high isolating strength and durability. EFS poly bushes have an elastomer rating of 80 Duro to give improved suppleness and grease channels for increased distribution of lubrication properties.

EFS Panhard Rods

The EFS adjustable Panhard Rod corrects the lateral location of the diff and centralises the diff location. When a 4WD is lifted beyond a certain height the diff is pulled across by the standard panhard rod.

EFS Panhard Rods are made from high strength steel with high performance polyurethane bushes.

EFS Shackle pins and swing shackles

EFS Shackle Pins and Swing Shackles are engineered to be stronger than the original equipment and greaseable for ease of service.

The products are then case hardened and gold cadmium plated or black oxided for increased strength and corrosion protection.

Superior Engineering Lower Control Arms

Superior Engineering heavy duty straight adjustable lower control arms are used mainly on coil cabs to adjust the wheelbase and/or pinion angle. Made from quality high tensile bar, 1 1/8 UNF thread with twin lock nuts to eliminate any chance of the nuts coming loose, 150mm long threaded rod for ample adjustability and coated in a rust-resistant zinc finish and with rubber bushes fitted.

Superior Engineering Sway Bar Extensions

Manufactured from high grade aluminium, these sway bar extensions eliminate the need to remove the sway bars when performing lifts, ultimately making the vehicle drive far better with the sway bars still fitted.

Superior Engineering Tail Shaft Spacer

These spacers are for when your driveline is too short after doing a lift.

Superior Engineering rear driveline spacers are machined from 6061 T6 aluminium and include hardware.  Includes most common Toyota driveshaft bolt patterns and comes with grade 8.8 high tensile bolts. Please ensure the hole spacings are measured prior to ensure expected results.

Superior Engineering Brake Proportioning Valve Bracket

Easy to bolt-on, Superior Engineering Brake heavy duty proportioning valve bracket.

Boss 4WD Drop Boxes

4WD Dropbox system specifically for the Toyota Land Cruiser 80 Series designed and engineered by Boss 4WD, that fits and works perfectly.  These Dropboxes solve the problem of track rod clearances and castor correction issues when fitting 3-4″ to 6″ lift kits.

They are simple to fit, deliver a desirable degree castor angle, and allow further tuning of castor angle using offset bushes to trim the final angles using your original radius arms. The Boss Dropbox design is strong, negates any transverse load issues, and delivers correct angles and clearances at the nominated lift.